De BW-100STV en BW-100SRV zijn HDMI en HD-SDI Wireless Transmitter en Receiver die gebruik maken van een H.264 codec. Ingebouwde V-mount plates.
Input | |
---|---|
1 x BNC | HD/SD-SDI, 3G/1.485G/270M |
1 x HDMI | HDMI, (with HDCP v.1.1), 19pin Female |
Audio Input | |
1 x Phone Jack In | 3.5mm TRS, Line Level Input |
Video Formats | |
HD | 1920 x 1080 (60p, 59.94p, 50p) 1920 x 1080 (60i, 59.94i, 50i, 30p, 29.97p, 25p, 24p, 23.98p) 1920 x 1080 (30psf, 29.97psf, 25psf) 1280 x 720 (60p, 59.94p, 50p) |
SD | NTSC, PAL |
Output | |
1 x BNC | SDI Active Loop Output |
Radio | |
Frequency | U-NII-1(5.15~5.25 GHz), U-NII-3(5.725~5.85 GHz |
Transmission Power | 20mW(13.5dBm) |
Transmission Distance | 150m(500 feet), 500m(1600 feet, with special antenna) |
Latency | 20ms |
Encoding/Decoding | H.264 Base Profile @4.2 |
Antenna | 2T x 2R SMA Female |
Security | 802.11i compatible signal protection by 128bit AES encryption |
Multiple Receivers | up to 4. (Maximum distance may decrease due to signal division) |
General | |
1 x GPIO | GPI-7 Port, RJ-45P Jack |
2 x mini_USB | F/W Update ( MAIN , MICOM) |
4 x LED | Power, Link, Battery, Tally |
4 x Switch | Reset, Pairing, Input Selection, Power |
Battery | V-Mount |
Power Requirements | DC (7V~17V) or AC Adaptor(100 ~ 230V, 50Hz/60Hz) |
Power Consumption | 10W |
Operating Temperature | 0°C ~ 40°C (32°F ~104°F) |
Operating Humidity | 20% ~ 80% RH |
Weight | 1.02kg |
Dimension | 152.2 x 90.0 x 42.2 mm (5.9 x 3.5 x 1.6 inch) |
BW-100SRV
Ouput | |
---|---|
2 x BNC | HD/SD-SDI, 3G/1.485G/270M |
1 x HDMI | HDMI Out |
General | |
1 x IR | Remote Control Unit |
1 x GPIO | GPI-7 Port, RJ-45P Jack |
1 x mini USB | for Firmware Update |
4 x LED | Power, Link, Battery, Tally |
Battery | V-Mount |
Power Requirements | DC (7V~17V) or AC Adaptor(100 ~ 230V, 50Hz/60Hz) |
Power Consumption | 9W |
Operating Temperature | 0°C ~ 40°C (32°F ~104°F) |
Operating Humidity | 20% ~ 80% RH |
Weight | 1.02kg |
Dimension | 152.2 x 90.0 x 42.2 mm (5.9 x 3.5 x 1.6 inch) |